======================================================================================
Wanted: Partner(s)
for share in building partially complete Experimental Twin Project
Looking for 1 to 3 financial partners for building a one of
a kind, locally designed, partially complete, experimental light twin,
Wickham
Model F. Closest comparable factory type configuration is the
Partenavia P68,
except slightly lighter than an Apache or Twin Comanche. Aluminum, 6
place, 38’
8” span, 160 sqft area, est 2100 empty, 32-3600 gross, fixed mains,
retractable
nose wheel, sorta STOL. Engines could be 150 to 180 hp. Design is
evolution of
Wickham Model B twin based at Paine. Propose staring project in earnest
within 1-2
years, finish within 10 years. Construction starting at my house in Renton or nearby
location.
Twins are not cheap, so looking to share build (and operating) costs
with at
least 1 but no more than 3 others (so, 50%, 33%, or 25% shares
depending on
interest). This is no small project. If seriously interested, contact
Tom
Osmundson, 253-239-6175 dieselfume@dieselfume.com.
======================================================================================
House
at Crest Airpark
Now YOU can afford an AIRPORT HOME!
3Br 1.5 baths, 2070sqft, metal roof, 29648 179th Pl SE, Kent, WA 98042
49X45 heated hangar, MIL space and more. Retiring Retired!
Current tax assessed value 472K.
MLS#29093570 $510k $450k 253-630-1689 James Huber
======================================================================================
Metal Hangar for sale
Pierce County Airport (Thun Field)
45x50, 45x14 electric bifold door. Heated and insulated, has seperate bathroom. $155k
Contact Gene Endsley, 206-300-1197
===========================================================================
T-18
Project For Sale—Hangared
at Tacoma Narrows Airport:· Engine
(GPU conversion to O-290D worth $7,000 or more)
· Pacesetter wood
prop 68 X 68
· Professionally built wing spar and ribs.
· With the exception
of instruments, all parts and materials to finish the project are on
hand.
· Terra:- COM, NAV, & OBS
· NavAid AP (head and servo ).
Tom
Worth (253)
576-2730 (cell)
or E-mail
==============================================================================
Ancient
TIG welder. Wilson 200 amp MCM HeliWelder,
model 200MCM-1H. 220v, single phase.
This
is a DC machine with a High Frequency
generator option. Works well in DC
on
steel with the HF for starting, and also works well on aluminum using
the HF continuously. Can also be used as a
stick welder. Three amperage ranges, with
continuous amperage variation within each range. No
torch, no ground lead, no stick lead, no argon bottle, and no radiator. I've always only used an air-cooled
torch, and
I need that and the other stuff for my new machine.
Works well, priced right. Brian Lee
253-639-0489
==============================================================================
Barracuda Project For Sale
For those unfamiliar with the Barracuda, it is a plans built
aircraft designed by local a Boeing engineer, Jeff
Siers. It won an award for best new design at Oshkosh back around 1976.
The plane is an all wood, 2 place, low wing, high
performance airplane. My website is at
http://members.aol.com/flybarracuda.
You can see some pictures of the project there. The
plane’s airframe is almost completely finished. The new owner would
need to finish the flap, the fuel system, wire and plumb the aircraft,
and
finish all firewall forward. I do have the glass for the canopy
and
windshield along with fiberglass cowling parts. There is an engine
mount
already on the plane and it is set up for the recommended O-540 engine.
Please let me know if you have any questions. I am asking $6000
for it.
I would like to sell it to a local EAA member. It is located in
my garage in Enumclaw.
Tony Szabo
253-232-9726
==============================================================================
I am helping a fellow (Jerry Yagen) http://www.fighterfactory.com/ locate
World-War-One era engines/airframes or replicas. Hispano-Suiza, Mercedes,
Hall-Scott, Liberty, OX-5, Siemens-Halske, Oberursel, Clerget, LeRhone,
Gnome, other rotaries, etc. If you know of anything for sale or trade I'd
appreciate any information.
Russ Lassetter
EAA# 0448996
Cleveland, Georgia
==============================================================================
RV-8A project for sale. Reason: Lost medical. Empennage
complete. Wings about half finished. Fuselage kit untouched.
Could easily be RV-8 taildragger at this point. Complete set
of Avery tools. Boeing Surplus work tables. Any reasonable
offer will be accepted. Contact Bill Kelly: Lake Tapps area.
253-826-1218
_____________________________________________________________________
